Admin Website UNIKOM

Tag: kuliah teknologi informasi

  • Requirement Analysis of Monitoring Information System for Indonesian Migrant Workers Protection

    Requirement Analysis of Monitoring Information System for Indonesian Migrant Workers Protection

    Hasugian L.P. ; Rahayu T.M.

    DOI: 10.1088/1757-899X/407/1/012150

    Abstract

    There are still many Indonesian Migrant Workers, or commonly reffered to as Tenaga Kerja Indonesia (TKI), who are involved in criMinality whether as the victim or under criMinal prosecution while working abroad. This indicates that the involvement of stakeholders including the government in protecting TKI has not yet been maximized. The existing efforts only focus on law and regulation and lack in quick and proper response. These issues can ideally be Minimized if there is a form of continuous communication between migrant workers and the stakeholders during TKI placement. This research focus on analyzing the requirements to develop TKI protection information system. The requirements are obtained through SWOT analysis. The results show that TKI need to make regular reports through the information system. System then monitors TKI condition overtime to assess their situations and notifies government and/or other stakeholders if any response needs to be taken. Through this information system analysis, the model for TKI monitoring information system that connects every stakeholders is developed. It is expected that this work would provide government a model for information system to assist TKI work safely and comfortably. TKI will have confident that they are with caring government. Therefore various issues that occur can be dealt seriously, quickly, and appropriately. © Published under licence by IOP Publishing Ltd.

    Indexed keywords

    Engineering controlled terms

    Information systems; Information use

    Engineering uncontrolled terms

    Criminal prosecutions; Indonesians; Migrant workers; Monitoring information system; Protection information; Requirement analysis; Research focus; SWOT analysis

    Engineering main heading

    Monitoring

    This article can be accessed at https: https://www.scopus.com/pages/publications/85054817608

  • E-Government Master Plan Design With Togaf Framework

    E-Government Master Plan Design With Togaf Framework

    Ian Yosef Matheus Edward ; Wervyan Shalannanda ; Susmini Indriani Lestariningati ; Aldo Agusdian

    DOI: 10.1109/TSSA.2014.7065957

    Abstract

    This paper presents how to implement TOGAF Framework for designing E-Government Master plan. TOGAF is usually used to design Application or Information System, with several audit based on TOGAF in small number of Master plan. The challenge is to use which kind or version of TOGAF that is suitable and try not to trap on the detail design as if is implement on the Application or Information System design. TOGAF ADM is chosen to guide the Business, Data, Information System, and Technology Architecture Design, while the Proposed Method is proposed to accomplish solution domains. This proposed method is planned to be submitted to Open Group Organization as enrichment for Enterprises Continuum in TOGAF Framework. The Proposed Method for E-Government Master plan Design is to cover the Solution, Migration Plan, Implementation Governance, and Change Management Domains. The method contains guideline solution for those domains include the artifacts that are suitable for E-Government Master plan solution. The Case Study is perform for Local Payakumbuh City Government, the additional challenge is to interpret non TOGAF-wise guidelines from Central Government and effective and economic solution required. Although the case study is perform for local government but the method or tools itself is to make in generals which can be customized as tool for any central government. © 2014 IEEE.

    Author keywords

    Architecture; Case Study; E-Government; Guidelines; Master Plan; Method; TOGAF; Tools

    Indexed keywords

    Engineering controlled terms

    Architecture; Information systems; Information use; Telecommunication services; Tools

    Engineering uncontrolled terms

    Central government; Design applications; Economic solutions; Guidelines; Master plan; Method; Technology architectures; TOGAF

    Engineering main heading

    e-government

    This article can be accessed at https: https://www.scopus.com/pages/publications/8493723921

  • Proposal Of Togaf Adm Enterprise Continuum for Organization-Specific Solution on E-Government

    Proposal Of Togaf Adm Enterprise Continuum for Organization-Specific Solution on E-Government

    Ian Yosef Matheus Edward ;Wervyan Shalannanda ; Aldo Agusdian ;Susmini Indriani LestariningatiDOI: 10.1109/ICEECS.2014.7045263

    Abstract
    This paper presents the proposal of TOGAF ADM Enterprise Continuum for organization-specific solution. TOGAF includes the concept of the Enterprise Continuum, which sets the broader context for an architect and explains how generic solutions can be leveraged and specialized in order to support the requirements of an individual organization. The Enterprise Continuum is a view of the Architecture Repository that provides methods for classifying architecture and solution artifacts as they evolve for generic Foundation Architectures to Organization-Specific Architectures. The Enterprise Continuum comprises two complementary concepts: the Architecture Continuum and the Solutions Continuum. This Proposed TOGAF ADM Enterprise Continuum for Organization-Specific Solution on e-Government is focused on addressing enterprise need. The Solution Continuum covers the Opportunity and Solution, Migration Plan, Implementation Governance, and Change Management Domains phases. The method contains guideline solution for those domains include the artifacts that are suitable for E-Government Master Plan. © 2014 IEEE.

    Author keywords
    Enterprise Continuum; Solution Continuum; TOGAF ADM

    Indexed keywords

    Engineering controlled terms
    Computers

    Engineering uncontrolled terms
    Change management; E-governments; Generic solutions; Master plan

    Engineering main heading
    Government data processing

    This article can be accessed at https://www.scopus.com/pages/publications/84949925165

  • An Augmented Reality-Based Lipstick Color Recommendation System Model to Help Prevent COVID-19 Spreadness

    An Augmented Reality-Based Lipstick Color Recommendation System Model to Help Prevent COVID-19 Spreadness

    Authors: Agustia R.D, Bryllyanti A

    DOI: 10.1063/5.0128549

    Abstract

    The aim of this research is to provide lipstick color recommendations based on the analogous color theory. The recommended lipstick color is based on the user’s skin tone color, where the skin color that is taken is the skin of lip color. Facial landmark detection will be used as a method to detect the position of the user’s lips where the recommended lipstick color results can be seen in the form of augmented reality. To find out what lipstick products are used as the basis for lipstick color recommendations, questionnaires were distributed using random sampling to 100 female respondents, and data was sorted to obtain the three products that were most widely used by female respondents in Indonesia. Based on the results of the questionnaire the products most widely used by respondents are Wardah, Makeover, and Emina products. The results of the research is lipstick color recommendation system model based on the user’s skin tone color using augmented reality facial landmark detection method. Based on performance testing, detection can be carried out well with the criteria that the face is facing the camera with a tilt position of 0 °-45 °, the optimal distance between the camera and the face is 20-80 cm, and with optimal lighting using 40W incandescent lamp or 8 W-23W fluorescent lamp. During the COVID-19 pandemic, using lipstick product samples at the same time will increase the risk of contracting COVID-19 so the lipstick color recommendation system will be an alternative to help prevent COVID-19 spreads. © 2023 Author(s).

    Keywords: Augmented reality; lipstick color recommendation system


    This article can be accessed at https://www.scopus.com/pages/publications/85177603924

  • Air Quality Monitoring System for Cyclist

    Air Quality Monitoring System for Cyclist

    Authors: Aria M. ; Wangsanegara T. ; Kurniawan F. ; Maulana T.

    DOI: 10.1063/5.0129192

    Abstract: 

    In recent years, emissions of toxic gasses caused by burning fossil fuels, industrial production, and vegetation loss have made air pollution even worse. The concentration of harmful gasses and particulates increased in the atmosphere. Air quality influences human health, especially the particulate matter that affects the respiratory system of people. To find out the level of air pollution for bicycle users, we need an instrument to detect pollution levels in the air that functions as a monitor of pollution levels and early detection in air pollution, so it becomes a reference for bicycle users in knowing their area of cycling whether or not it has good air quality. The system development method in this study used the prototype method because this method can be easily evaluated and implemented in stages. The device’s hardware consists of three sensors: gas sensors MQ-7, MQ-135, and a DHT-11 Humidity sensor. The device has three sensors attached with an Arduino. The air quality measurement device generates real-time air pollutants monitor from the sensor and shows the information using the Liquid Crystal Display (LCD). In conclusion, it is affordable, user-friendly, low-cost, and minimum-power requirement hardware and comprehensible data collection. It is helpful for the bicycle user to be concerned about the health of air condition near the cyclist area. © 2023 Author(s).

    Author Keywords:

    air quality; cyclist; Monitoring system

    This article can be accessed at https://www.scopus.com/pages/publications/85177557112?

  • Elevating PCP Level Implementation: A Strategic Approach with Architecture Software in the COVID-19 Era

    Elevating PCP Level Implementation: A Strategic Approach with Architecture Software in the COVID-19 Era

    Authors: Yeffry Handoko ; Zuriani Ahmad Zukarnain ; Rahma Wahdiniwaty ; Noorihan Abdul Rahman

    DOI: 10.1109/INCITEST59455.2023.10397031

    Abstract:

    Between 2020 and 2021, Indonesia and Malaysia were both impacted by the COVID-19 pandemic. These two nations adopted a strikingly similar approach to restrict access to certain areas, primarily relying on identical criteria. In the case of Indonesia, the PPKM (Community Activity Restriction Enforcement) strategy was employed, this contained a component involving the exposure of COVID-19 affected persons. The determination of the extent of this exposure was primarily based on monitoring the rise in the number of individuals who had been in contact with COVID-19-positive individuals. However, during a pandemic, it’s imperative to consider not only those individuals who are confirmed to have COVID-19 but also those who exhibit symptoms similar to COVID-19 but have not been diagnosed. These individuals can also act as potential agents for the spread of the pandemic within their communities. This is referred to as the “Precaution COVID-19 Pandemic (PCP) Level.”It’s important to note that the PCP level does not have a universally agreed-upon definition at present. Instead, it is influenced more by the number of individuals displaying symptoms akin to those of COVID-19, rather than solely relying on the increase in confirmed COVID-19 cases. In essence, both countries shared a comparable approach to pandemic management during this period, but the emergence of the PCP level underscores the need for a broader perspective when assessing the pandemic’s impact on communities, considering not only confirmed cases but also symptomatic individuals who may contribute to its spread. The PCP Level determination can be used for preventative policy and to supplement the previous Pandemic Level Methods. Two methods are employed to realize this concept: the AHP approach for calculating the Covid-19 pandemic level and the K-Mean algorithm for pattern clustering. Data was gathered from 11 health centers in West Java province. The findings of this study underscore the potential of a multifaceted approach to pandemic precaution in the context of COVID-19. By synergistically integrating the three proposed algorithms and leveraging data on symptoms that are intricately linked to the predominant COVID-19 symptoms, this research illuminates a promising avenue for determining and implementing precautionary measures during the ongoing pandemic. This holistic strategy not only offers a more comprehensive understanding of the virus’s spread but also furnishes decision-makers with a versatile toolkit for tailoring precautionary actions to different circumstances, ultimately contributing to more effective and adaptive pandemic management. © 2023 IEEE.

    Author Keywords:

    clustering; Covid-19; decision support; Precaution

    This article can be accessed at https://www.scopus.com/pages/publications/85185194944?

  • Modeling COVID-19 Prevention from Influenza Symptoms Using Kalman Filter Approach

    Modeling COVID-19 Prevention from Influenza Symptoms Using Kalman Filter Approach

    Authors: Yeffry Handoko Putra ; Noorihan Abdul Rahman ; Zuriani Ahmad Zukarnain ; Rahma Wahdiniwaty

    DOI: 10.1109/ICSPIS59665.2023.10402787

    Abstract:

    Several countries have stopped community restriction program activities in dealing with COVID-19, including in Indonesia which has stopped a similar program at the end of 2022. Each country is starting a new era, namely the COVID-19 prevention program, but not all countries have accurate data regarding the type symptoms that could be indicators of prevention. This inaccuracy will be overcome using the behavior of the Kalman Filter while the presumption that influenza symptoms can be use to approach the COVID-19 symptoms. Various Kalman Filter models will be tried which represent the level of concern for prevention, which we call the COVID-19 Pandemic Precaution Level (PCP). The data for this study were obtained from a number of symptoms encountered that resemble the symptoms of COVID-19 after 2022. And provide the results of several Kalman Filter models for normal worries and extreme worries. © 2023 IEEE.

    Author Keywords:

    COVID-19 model; Influenza; Kalman Filter; prevention; symptoms

  • Design and Realization of Equipment for Early Prevention of the Spread of COVID-19

    Design and Realization of Equipment for Early Prevention of the Spread of COVID-19

    Authors: Syahrul ; Nurhayati S. ; Wicaksono M.F. ; Hidayat R.

    DOI: –

    Abstract:

    This research discusses how to design and realize a system that prevents the early spread of the virus, especially COVID-19, through hand contamination. This equipment is an integrated system starting from detecting the presence of people in a certain radius, detecting human body temperature, and automatic hand washing equipment equipped with a hand dryer. This equipment consists of parts including sensors for the presence of people at a specific radius, temperature sensors, sensors on water taps, and sensors on hand dryers. In addition, this tool uses a bottom-loading system to make it easier to refill water and soap. Based on the results of the tests, this tool can operate adequately. The PIR sensor can detect people coming within 1-4 meters, non-contact temperature sensors can detect human body temperature well within a distance of 0-5 centimetres, whose results can be seen on the LCD and heard through speakers; IR proximity sensor can detect the user’s hand at a predetermined distance so that water, soap, hand sanitizer and hand dryer can work at that distance. This equipment is expected to be used when entering public service areas to minimize the potential for the spread of COVID-19. © 2023 Taylor’s University. All rights reserved.

    Author Keywords:

    Covid-19; Hand washing; Human temperature

    This article can be accessed at : https://www.scopus.com/pages/publications/85176565270?

  • Prototype Mobile Contactless Transaction System in Traditional Markets to Support the Covid-19 Physical Distancing Program

    Prototype Mobile Contactless Transaction System in Traditional Markets to Support the Covid-19 Physical Distancing Program

    Author: Irawan Afrianto ; Mouhamad Hatta Hiroshi Sasmita ; Sufa Atin

    DOI: 10.11591/eei.v10i6.3205

    Abstract

    One way to prevent and reduce the spread of the covid-19 pandemic is through physical distancing program. This research aims to develop a prototype contactless transaction system using digital payment mechanisms and QR code technology that will be applied in traditional markets. The method used in the development of electronic market systems is a prototype approach. The application of QR code and digital payments are used as a solution to minimize money exchange contacts that are common in traditional markets. The results showed that the system built was able to accelerate and facilitate the buying and selling transaction process in traditional market environment. Alpha testing shows that all functional systems are running well. Meanwhile, beta testing shows that the user can very well accept the system that was built. The results of the study also show acceptance of the usefulness of the system being built, as well as the optimism of its users to be able to take advantage of this system both technologically and functionally, so its can be a part of the digital transformation of the traditional market to the electronic market and has become one of the solutions in reducing the spread of the current covid-19 pandemic. © 2021, Institute of Advanced Engineering and Science. All rights reserved.

    Author keywords

    Contactless transaction; Covid-19; Digital payment; Prototype; QR code; Traditional market


    This article can be accessed at: https://www.scopus.com/pages/publications/85120610181

  • Driving Safety Application Using Wearable Device and Mobile Technology

    Driving Safety Application Using Wearable Device and Mobile Technology

    Author: Eko Budi Setiawan ; Tubagus F. Fatoni

    Abstract

    This research is conducted to help motorbike riders in avoiding accidents caused by drowsiness. The wearable device technology used was smartband and accelerometer from Android smartphone. It was used to obtain heart rate data and detect drowsiness experienced by motorbike riders. An accelerometer was used to detect if an accident occurs and send the information to the driver’s family. The method in this research was quantitative research and development. The results obtained showed that detecting drowsiness is equal to 80% and the accident detection test gets an accuracy of 100%. The accuracy of drowsiness detection during the day is 75% and testing that carried out at night has an accuracy rate of 90%. Functional suitability test results obtained a value of 100%, compatibility aspects have 100%, usability aspects of 84.7%, and performance aspects in terms of response time are in the range of satisfaction equal to 3.88 seconds. The tests conducted using Likert scale showed that the application is feasible to use, and the driving safety application has reached its desired purpose. This research impacts on driving safety that must prioritize safety both for self and for others. © School of Engineering, Taylor’s University.

    Author keywords

    Accelerometer; Drowsiness; Motorbike driver; Safety ride; Smartband


    This article can be accessed at: https://www.scopus.com/pages/publications/85114312008