Admin Website UNIKOM

Tag: QS World University Ranking

  • Cargo Vehicle Monitoring with Renewable Energy and Geofencing for Lane Restrictions

    Cargo Vehicle Monitoring with Renewable Energy and Geofencing for Lane Restrictions

    Author: Wicaksono M.F ; Syahrul; Sutono; Rahmatya M.D.

    DOI: 10.1088/1757-899X/662/5/052007

    Abstract

    The main objective of this research is to design a cargo vehicle monitoring system. The method used to limit the path is geofencing. The web application will limit the path to be traversed, so the warning alarm on the server will light up when the vehicle exits the specified paths. The advantage of this design is that the required power is taken from the battery, so there is no need to take power from the car battery. The battery will be charged by using a solar cell. On the hardware side, Arduino UNO is used as the main processor. Arduino will receive data from the GPS module then sent it to the server via the GSM GPRS module. On the software side, the data that has been received will be saved to the database, parsed, compared to the specified line limit and will be displayed on the web application. The results of this study are a model tool for monitoring cargo vehicles with the limitation of lanes and renewable resources. With this model, it is expected that it can help the entrepreneurs of goods delivery services to monitor their vehicle. © Published under licence by IOP Publishing Ltd.

    Indexed keywords

    Engineering controlled terms

    Application programs; Global system for mobile communications; Vehicles

    Engineering uncontrolled terms

    Cargo vehicles; Goods delivery; GPRS module; Modeling tool; Renewable energies; Renewable resource; WEB application

    Engineering main heading

    Secondary batteries


    This article can be accessed at: https://www.scopus.com/pages/publications/85075898728

  • Application of long-term renewable energy technology for nature balance

    Application of long-term renewable energy technology for nature balance

    Author: Sulistyo D. ; Maulana P. ; Yusup M.

    DOI: 10.1088/1742-6596/1402/6/06608

    Abstract

    The purpose of this study is to identify the development of renewable energy technologies in the world, especially Indonesia for the future. The method used in this study is a descriptive method, namely by presenting a complete picture of the situation associated with seeing the developments that have been applied. The result of this study is to find out the extent of developments in the clean energy and renewable energy sectors, as well as the importance of the environment and natural balance in aspects. This research was conducted by discussing the development of technology that is applied as a producer of clean energy that does not have a bad impact on the surrounding environment. © Published under licence by IOP Publishing Ltd.

    Indexed keywords

    Engineering uncontrolled terms

    Clean energy; Indonesia; Renewable energy sector; Renewable energy technologies; Surrounding environment

    Engineering main heading

    Physics
    This article can be accessed at: https://www.scopus.com/pages/publications/85077823962

  • Energy Utilization of Kinetic Paving Technology

    Energy Utilization of Kinetic Paving Technology

    Author: Ansori I. ; Wanita Subadra Abioso

    DOI: 10.1088/1757-899X/879/1/012152

    Abstract

    Nowadays, electricity has become a priority in daily life and can even be considered as a primary human need. On the other hand, the excessive use of electricity or energy and the increase in population is one of the factors that can increase energy requirements. In Indonesia, the use of electricity comes from very limited natural resources. Therefore, energy savings should be implemented, either by using as necessary or even making an update that can sustain existing electrical energy. Apart from saving energy, it would be better to create new energy with minimal effort. Like producing energy from daily human activities, one of it is walking. The result is the creation of Kinetic Paving material technology that when people step on it will produce electricity. The benefits of this technology can create electricity that can be used for the environment of this kinetic paving. As for lighting in paving as lighting art or as a source of energy for surrounding buildings. Kinetic Paving is applied in pedestrian traffic spaces. This energy is expected to help the community and the surrounding environment. This is an update that should have been implemented. When natural resources are getting low and energy prices are getting higher, we need all these reforms. © Published under licence by IOP Publishing Ltd.


    This article can be accessed at: https://www.scopus.com/pages/publications/85091363797

  • Study of Risk Assessment and Business Continuity Management of Analog to Digital Archiving Process in order to Guarantee Reliable System

    Study of Risk Assessment and Business Continuity Management of Analog to Digital Archiving Process in order to Guarantee Reliable System

    Author: Yeffry Handoko Putra ; Rahma Wahdiniwaty

    DOI: 10.1088/1757-899X/879/1/012018

    Abstract

    The process of converting analog files into digital files in the archiving process is a routine activity that needs to have appropriate procedures and is accompanied by a study of the profits and risks that accompany the process. The method of the research to solve this problem was by risk management approach refer to ISO/TR 18128 about risk assessment of recording data and ISO 22301 about Business Continuity Management (BCM). Through risk management, risk analysis review is conducted which determines the risk identification, risk assessment, risk evaluation, and strategies to enhance the ability to handle the digitization process. In other hands, business continuity management provides the potential benefit from the digitization process and guarantee of maintaining a reliable system. The companies to be observed are University, Government, and Financial Company (FC). The discussions are about the risk treatment with the strategy to reduce it and the comparison of maturity BCM from every companies. The result explains the readiest company in implementing analog to digital archiving process and the most company who has more mature in developing Business Continuity Management. © Published under licence by IOP Publishing Ltd.


    This article can be accessed at: https://www.scopus.com/pages/publications/85091365666

  • Information System Security Analysis of XYZ Company Using COBIT 5 Framework and ISO 27001:2013

    Information System Security Analysis of XYZ Company Using COBIT 5 Framework and ISO 27001:2013

    Author: Prapenan G.G, Pamuji G.C

    DOI: 10.1088/1757-899X/879/1/012047

    Abstract

    Information system security is now very important to prevent from an attack. Besides that, low level security can harm the productivity of an organization. The purpose of this research is to ascertain and know the level of information system security in XYZ Company, because it has never conducted an audit information system security. In this research, it used the COBIT 5 framework to audit information security management system in a company based on the ISO 27001 standard. This audit was conducted to identify information system security that was not good. In addition to improving the information security management system that will be adjusted to the ISO 27001 standard. This research was composed by applying a qualitative methodology, observation of the activity in the company and reviews related information security management system literature document existing. For the auditing using COBIT 5 framework, audit focuses on four kinds process that consists of APO12, DSS05, MEA02 dan EDM03. The audit COBIT 5 two results in consisting of “Managed Process”Level on APO12, MEA02 and EDM03 and “Performed Process”level on DSS05. The resulting of this research will be used a reference to the improvement of existing information system security in the company. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091366155

  • Optimization of Forest Plant Seeding Based on the Internet of Things

    Optimization of Forest Plant Seeding Based on the Internet of Things

    Author: Hirawan D, Mahendra D

    DOI: 10.1088/1757-899X/879/1/012052

    Abstract

    The research objective is to compare the seeding of forest plants using manual methods with the Internet of things-based seeding. The research method used a prototyping model. In this research, the application of the Internet of Things is supported by solar panels that are used as alternatives energy if at some time conventional energy has decreased power or disconnected. Thus, the use of tools connected to each other can continue to run without worrying about losing power. Some of the parameters measured in this seeding include room temperature, soil pH, and soil humidity. Sensor equipment used includes temperature sensors, Soil Moisture Sensor, and soil pH sensors. The temperature sensor is used as a trigger to turn on the blower that serves to remove heat from the room. Besides, the moisture sensor is used as a trigger to turn on the water pump used as an automatic sprinkler of crop seeds. Then, soil pH sensors are used to measure soil acidity levels that affect the growth of forest plant seeds. As for the seeding process is done using Mangium type plant seed or in Latin “Acacia Mangium”by using 400 seed samples. The results of this study showed that there was an increase in seed growing during seeding supported by the Internet of Things method of 24% compared to manual methods. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091370118

  • Integration of TOGAF 9.1 ADM in Enterprise Architecture Smart City Design in the Tourism Domain with ISO 27001

    Integration of TOGAF 9.1 ADM in Enterprise Architecture Smart City Design in the Tourism Domain with ISO 27001

    Author: Subakti P, Putra Y.H

    DOI: 10.1088/1757-899X/879/1/012029

    Abstract

    The purpose of this research is to create an enterprise architecture design smart city that has a high-security system in the tourism domain that includes smart experiences, smart destinations, and smart business ecosystems. The method used in this research was integrating ISO 27001 as an international information security standard on the TOGAF 9.1 ADM used as a framework for designing enterprise architecture. The result of design can improve Quality Assurance (QA) of the IT information security system, increase IT and business alignment and increase security awareness among government, tourists, industries, and the local community. Business Architecture focuses on centralized coordination by the board and evaluation of the performance of tourism stakeholders; Analysis results of data collection into information and useful on architecture or stakeholders; while application architecture has a focus on developing applications for tourists, business entities, and government monitoring; The technology architecture as the supports to the implementation of research with a data center, cloud service, and transaction interface that is given NFC technology. The result of this research is a smart city enterprise architecture design with a tourism domain that can be implemented in a smart city area and has a security system architecture after phase D of Requirements Management TOGAF 9.1 ADM with a higher security level. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091380516

  • Designing Universal Smartphone Case with Solar Powered Chargers

    Designing Universal Smartphone Case with Solar Powered Chargers

    Author: Henny H, Purwadi D, Hardianto H, Widilestariningtyas O

    DOI: 10.1088/1757-899X/879/1/012177

    Abstract

    The purpose of this research is to design a product to transform solar energy to electric energy that can be used to charge the battery of phones. Method used in this study is to design chargers that can be used anywhere is ulrich method. This method consists of some steps such as planning, developing a concept stage, planning system-level, detailed design, experiment, and improvement. The results are the charging process on a smartphone with a capacity of 1810 mAh battery is fully charged within 1 hour and 23 minutes. The output generated by the tool is 0.8 ampere and 5 volts. The price is below the maximum target specification that is worth 150,000. The conclusion of this research is the concept of designing universal smartphone case with solar powered chargers requires the stages of elimination and filtering to produce a solar smartphone case that is made of brecket also using a solar powered converter and power transport mode such as USB female port. The impact of this charger is the product can be used by people that likes to go to nature. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091383558

  • ISO 27001:2013 for Laboratory Management Information System at School of Applied Science Telkom University

    ISO 27001:2013 for Laboratory Management Information System at School of Applied Science Telkom University

    Author: Alit Yuniargan Eskaluspita

    DOI: 10.1088/1757-899X/879/1/012074

    Abstract

    School of applied science is one of the faculty that Telkom University had. It focused on vocational education which leads to the implementation of practicum activities in daily lectures. The number of facilities and the needs to support the practicum is not small, also its value is not cheap. So to manage that data faculty use an information system that focused to organize and manage all data of laboratory and practicum needs, called SIMLAB. Information security is important so that the crucial information is not leaked to an unwilling party. It does not have the management of information security to prevent that possibility. This research was conducted by identifying the level of information security by ISO 27001:2013 in that department to be used as a framework in the implementation information security system. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091390170

  • Green Building Concept Application with VRF Air Conditioning System

    Green Building Concept Application with VRF Air Conditioning System

    Author: Herman Soegoto

    DOI: 10.36909/jer.ASSEEE.16107

    Abstract

    The objective of this research is to find out the benefit of the Green Building Concept application with VRF Air Conditioning System at Indonesian Computer University. The research method used is descriptive quantitative analysis. Based on research findings, the VRF air conditioning system in Indonesian Computer University could reduce electrical power usage and the monthly cost for electrical power. However, the payback can only be reached after 15 years of operation. The other benefits are the space efficiency for more flexible placement of the outdoor unit and did not decrease the building’s aesthetic appearance. © 2021 University of Kuwait. All rights reserved.

    This article can be accessed at https://www.scopus.com/pages/publications/85123740992