Admin Website UNIKOM

Tag: Garuda

  • Architecture and Design in the Digital Age

    Architecture and Design in the Digital Age

    Authors: Robinson R. A, Tarmawan I

    DOI: 10.1088/1757-899X/879/1/012150

    Abstract

    This paper aims to identify the existence of emerging trends in contemporary architecture called digital architecture. Based on the latest literature on the intensive use of Information and Communication Technology (ICT) in Indonesian architectural practices, the article shows how this technology change people’s behavior in the past decade has contributed to a real revolution in this field by building a new paradigm of conceptualizing, developing and implementing architectural products. This study used descriptive method to present a complete picture of social settings or intended for exploration and clarification of a phenomenon or social reality by describing a number of variables relating to the problem and the unit under study between the phenomena tested. The result of this study showed the importance of updating project professionals in the field of digital technology and a thorough review of the architecture school curriculum in the sense of removing the applied computer. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091393631

  • Experimental Study Improving the Friction in the Surface of Cold Form Steel Connections Using Adhesive

    Experimental Study Improving the Friction in the Surface of Cold Form Steel Connections Using Adhesive

    Author: Setiyarto Y. D

    DOI: 10.1088/1757-899X/879/1/012169

    Abstract

    The purpose of this study is to test the strength of light steel joints using screws and the addition of adhesives to the surface of the joint. The addition of adhesive is done to increase the frictional force on the surface of the joint. The study was carried out experimentally by giving axial tensile strength to the specimens. The specimen is a mild steel connection made from a lip channel profile that is connected back to back with 2 screws and has 2 variables, namely adhesive and without adhesive. Each variable has 3 samples. The experimental results show that the addition of adhesives to the joint system is proven to increase friction. This shows that the joints that use adhesives have a greater strength of 17.20% than the joints without adhesives. The mechanism of collapse of the joint using adhesive starts from the collapse in the friction plane, then the screw undergoes tilting and subsequently experiences a collapse in the fused plane. From the results of this study it was concluded that the use of adhesives can be used as an alternative to increase the frictional force on the surface of the mild steel joints. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091371421

  • Private Cloud Development in West Java Cooperative and Entrepreneurship Education and Training Center

    Private Cloud Development in West Java Cooperative and Entrepreneurship Education and Training Center

    Authors: Setiyadi A, Setiawan E. B

    DOI: 10.1088/1757-899X/879/1/012036

    Abstract

    The purpose of this research is to build a private cloud that is used as an FTP server and database server as well as an integrated data storage medium in the education and training center of cooperatives and entrepreneurs in West Java. The stages of research from the development of private cloud in the education and training center cooperatives and entrepreneurs in West Java adopted the method of the Network Development Life Cycle (NDLC). The stages in the network development life cycle consist of six stages including the analysis phase, the design phase, the simulation stage, the implementation phase, the monitoring phase, and the regulatory stage. The results of this study are the existence and availability of server virtualization that is used to provide data-based services at the West Java Education and Cooperative Education and Entrepreneurship Training Center and the availability of integrated data storage at the West Java Education and Cooperative Education and Entrepreneurship and Training Center. The impact of this research is to be able to minimize the cost of procuring servers using private cloud using virtualization technology at the education and training center of cooperatives and entrepreneurs in West Java. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091381554

  • Forward Engineering in Student Mark Recapitulation Application

    Forward Engineering in Student Mark Recapitulation Application

    Authors: Mauluddin S, Sidik R

    DOI: 10.1088/1757-899X/879/1/012055

    Abstract

    This research intends to carry out forward engineering of the student mark recapitulation application in the information systems department, Universitas Komputer Indonesia. The forward engineering is the final step of the reengineering process in the mark recapitulation application. Re-engineering is done because the student mark recapitulation application cannot function properly. This re-engineering used the big bang approach, which is to rebuild or change the entire existing system, while the forward engineering stage follows the stages of the general model of re-engineering software, namely conceptual, requirements, design, and implementation. The conceptual and requirements stages have been carried out in previous reverse engineering research, so that in the forward engineering the research phase will start from the design stage then proceed to the implementation phase. The programming language in the existing application uses visual basic and the new application will be rebuilt using the java programming language. The results of this study are the student mark recapitulation application which has nine functions, namely lecture management, curriculum management, student management, import mark, mark management, system settings, temporary transcript printing, final transcript printing, and graduation certificate printing. Based on the results of tests on several computers with different operating systems, this application can function properly as expected. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091391562

  • Review of Construction Automation and Robotics Practices in Indonesian Construction State-Owned Enterprises: Position in Project Life Cycle, Gap to Best Practice and Potential Uses

    Review of Construction Automation and Robotics Practices in Indonesian Construction State-Owned Enterprises: Position in Project Life Cycle, Gap to Best Practice and Potential Uses

    Authors: Yongki Alexander Tanne, Ni Luh Ayu Indrayani

    DOI: 10.1007/s44150-023-00098-5

    Abstract

    Construction Automation and Robotics is the anticipated technology to overcome productivity issues and work accidents. This research aims to analyze the implementation of Construction Automation and Robotics at Indonesian Construction SOEs from the perspective of real project implementation based on project life cycle, comparison with best practices, and potential uses, through the qualitative-comparative analysis of the literature as well as questionnaires and in-depth interviews. It attempts to report how this technology is implemented in Indonesia as a comparison tool for other countries. This research identifies that seven Indonesian Construction SOEs have been using Construction Automation and Robotics technology, where Drones, Virtual Reality, and Prefabrication and Modularization are the most popular and mostly implemented in the construction phase. Compared to best practices, those implementations are still in the adoption stage. It has not reached its full potential through the development stage due to insufficient collaboration between contractors, technology companies, and universities. Although the construction market in Indonesia has not directly demanded in-project applications, this technology is potentially considered to improve the completion of construction projects, especially the interaction prospects of Digital Twin and BIM. This study provides complete positional information on Construction Automation and Robotics type in the project life cycle in theory and practice as a benchmark for construction technology research. This study fills the research gap and pioneers Indonesia’s Construction Automation and Robotics implementation research in international journals by providing the latest and comprehensive overview and comparing it to good practices from the USA and China. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2023.

    Author keywords

    Best Practice; Construction Automation and Robotics (CAR); Critical Success Factors (CSFs); Indonesian Construction SOEs; Project Life Cycle (PLC)

    This article can be accessed at https://www.scopus.com/pages/publications/105018864115

  • Building Fa ade of the Architect Richard L.A. Schoemaker in Bandung

    Building Fa ade of the Architect Richard L.A. Schoemaker in Bandung

    Authors: Martana S.P, Yapsie J. C, Abdurrahman, Prasetyo F. S, Syauqi I. D. N

    DOI: 10.1088/1757-899X/879/1/012170

    Abstract

    Schoemaker is the first Professor of Architecture in Indonesia. His works are the basis of modern architectural design in Indonesia. The the aim of this work is to find out Schoemaker’s concepts through scruntinizing the facades of his work. An architectural survey method is used in collecting the architectural data among several Schoemaker’s buildings in Bandung. Artifact measuring is conducted to build the 3D models of each of his building works, to analyze the architectural thinking of his. The result is showing that Schoemaker is using many concepts of early Dutch Architects used, including the Indo-European Architecture, the Art Deco and in time, combining it with the ornaments, materials, and patterns of local tradition. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091382952

  • Prototype of E-Document Application Based on Digital Signatures to Support Digital Document Authentication

    Prototype of E-Document Application Based on Digital Signatures to Support Digital Document Authentication

    Authors: Afrianto I, Heryandi A, Finandhita A, Atin S

    DOI: 10.1088/1757-899X/879/1/012042 

    Abstract

    The purpose of this research is to develop a prototype of a web-based application that can be used to provide digital signatures on files or digital documents. This prototype uses a digital signature mechanism issued by the Ministry of Communication and Information of the Republic of Indonesia (KOMINFO). The results of the research conducted by using the alpha test showed that all functionalities in the application have been able to run well. While the authentication test shows that any changes made to a document that has a digital signature will invalidate the digital signature, which means that there are attempts to falsify documents and their authenticity can be identified. This is because in documents that have the digital signature will have a certain hash value which if the document is changed or modified, then the hash value will change. This is what determines whether a document is still original or has been modified its contents, namely by comparing the hash value contained in the document. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091366235

  • E-Wallet as a Payment Instrument in the Millennial Era

    E-Wallet as a Payment Instrument in the Millennial Era

    Authors: Soegoto D. S, Tampubolon M. P

    DOI: 10.1088/1757-899X/879/1/012139 

    Abstract

    This research aims to find out the role of E-Wallet as a payment instrument in the millennial era. This research used a descriptive qualitative method to describe the role of E-Wallets as an instrument of payment in the millennial era. Digital payments or commonly referred to as mobile payments is an innovation of technological evolution, especially in the financial sector. The results of these technological innovations, one of which were an electronic wallet or commonly abbreviated as the E-Wallet. Currently, E-Wallet is commonly used by those who are in their productive age. High usability is one of the back screens that makes E-Wallet increasingly in demand by many people. The results showed that quite several people were able to understand the use of E-Wallet and began using it in their daily trading activities. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091347420

  • Relay Streaming System Model to Social Media Platform for Indoor Activity Broadcasting

    Relay Streaming System Model to Social Media Platform for Indoor Activity Broadcasting

    Authors: Agustia R. D, Wibawa M. K

    DOI: 10.1088/1757-899X/879/1/012071 

    Abstract

    The purpose of this research is to design a relay streaming model that can be streamed to several social media that provide live streaming services. The research method includes the analysis process which is divided into 4 stages. The first stage is an analysis of live streaming services on a social media. The second step is analysing the need for the server to be able to relay streams. The third stage is an analysis of the integration of the relay server system with live streaming social media services. The last stage is to design a system model based on previous analysis and determine the software requirements specification. The final result of this research is a relay streaming model with a server using Rasberry Pi which is integrated into Facebook and YouTube social media live streaming services. The development of this model is expected to solve the problem of limited indoor wireless networks and video input sources from various recording devices in relay streaming to several live streaming social media services simultaneously © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091380047

  • Synomorph of Behaviour Setting in Architecture Enhance the Green Design

    Synomorph of Behaviour Setting in Architecture Enhance the Green Design

    Author: Wanita Subadra Abioso

    DOI: 10.1088/1757-899X/879/1/012159 

    Abstract

    This paper intends to discover how the synomorph of behaviour setting in architecture could enhance the green design, with respect to space usage satisfaction and idleness of space. This research carried out through desk study and descriptive methods, as continuation of author earlier researches. Behaviour setting of a space exists as soon as a synomorph (same in structure and shape) between standing pattern of behaviour of user and physical milieu of space meet in circumjacent, a kind of fittingness. Barker developed behaviour-setting theory to explain small – scale social system, as well as the study of behaviour in its natural environment. Barker defines behaviour setting as independent units of space, with temporal and spatial boundaries, that have great coercive power over the behaviour that occur within them. The synomorph occurs in a behaviour setting offering fittingness between behaviour and the setting that could enhance the setting. The aim of this study encourages the architects to always consider to achieve synomorph in their space designs; the synomorph besides could increase space user’s satisfaction as well the value of spaces so that architects could avoid the idle space as one of codes in the green design. © Published under licence by IOP Publishing Ltd.

    This article can be accessed at https://www.scopus.com/pages/publications/85091355162